Hunter 31006 User Guide

8

44065-01  •  05/17/2011

Problem:
Excessive noise.
Solution:
1. Check the Water Tank to make sure it is properly seated on the base. 
2. Check the Water Tank to make sure there are no bubbles when the Water Tank 

is full and running. If there are bubbles, turn the unit OFF until the bubbling stops. 

When the bubbling has stopped, set the unit to the desired speed. 

Problem:
Humidifier not working. 
Solution:
1. Make sure the Power Knob is not set to OFF.
2. Adjust the humidity level using the Humidity Knob. Once the room reaches the 

set humidity level, the humidifier will turn OFF; this is normal. 

Problem:
Mineral build-up on the Water Tank or Tray. 
Solution:
1. Refer to the section “Cleaning and Storage” on page 8.

Problem:
Humidity output and water usage decreased.
Solution:
1. Check the Humidistat Knob and Power Knob to make sure they are set to the 

desired humidity level and speed. 
2. Check the Water Tank to make sure there are no bubbles when the Water Tank 

is full and running. If there are bubbles, turn the unit OFF until the bubbling stops. 

When the bubbling has stopped, set the unit to the desired speed. 
3. Clean any components that have mineral build-up. Refer to the section”Cleaning