Hunter 30756 User Guide

41558-01

Troubleshooting

Technical Support

If you have any additional questions or problems with your Hunter air purifier, please call

1-888-830-1326 from 8:00 am to 5:00 pm Central Time or contact us over the Internet at

www.hunterfan.com.

1. No display or operation.

2. Keypad does not work.

3. Erratic Display or Opera-

tion.

4. Filter and/or Pre-filter

Indicator is Flashing.

5. Cleanable Filter and/or

Carbon Pre-Filter Life

Counter is flashing 0%.

6. Unit has reduced air flow

or increased noise.

7. Remote is not working

properly.

Problem

Solutions

•  Confirm that the unit is plugged in.
•  Check the installation of the front grill.
•  Reset the air purifier. (See Resetting the Air Purifier on

pg. 10.)

• Key pad has been locked to prevent accidental changes

to the programs. (See Keypad Lock on pg. 9 to unlock

the key pad.)

• Reset the air purifier. (See Resetting the Air Purifier on

pg. 10.)

• The Filter and/or Pre-Filter Life Counters have reached

the estimated usage times. Check and replace or clean

filters if needed. (Refer to Filter and Pre-Filter Counters

on pg. 9.)

• The Filter and/or Pre-Filter Life Counters have greatly

exceeded the estimated usage times. Replace or clean

the corresponding filters.

• The filter is clogged and should be cleaned. (Refer to

Cleaning the Filter on pg. 12.)

• Be sure that the remote is facing the air purifier when

pressing the key.

• Check the batteries. (Refer to Remote Operation on

page 8.)