Intel Celeron 1.8MHz RK80531RC033128 Data Sheet
Product codes
RK80531RC033128
Datasheet
47
Intel
®
Celeron
®
Processor up to 1.10 GHz
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all Celeron processors frequencies.
2. All AC timings for the TAP signals are referenced to the TCK rising edge at 0.75 V at the processor pins. All
2. All AC timings for the TAP signals are referenced to the TCK rising edge at 0.75 V at the processor pins. All
TAP signal timings (TMS, TDI, etc.) are referenced at 0.75 V at the processor pins.
3. These specifications are tested during manufacturing, unless otherwise noted.
4. 1 ns can be added to the maximum TCK rise and fall times for every 1 MHz below 16.667 MHz.
5. Referenced to TCK rising edge.
6. Referenced to TCK falling edge.
7. Valid delay timing for this signal is specified to 1.5 V (1.25 V for AGTL platforms).
8. Non-Test Outputs and Inputs are the normal output or input signals (besides TCK, TRST#, TDI, TDO, and
4. 1 ns can be added to the maximum TCK rise and fall times for every 1 MHz below 16.667 MHz.
5. Referenced to TCK rising edge.
6. Referenced to TCK falling edge.
7. Valid delay timing for this signal is specified to 1.5 V (1.25 V for AGTL platforms).
8. Non-Test Outputs and Inputs are the normal output or input signals (besides TCK, TRST#, TDI, TDO, and
TMS). These timings correspond to the response of these signals due to TAP operations.
9. During Debug Port operation, use the normal specified timings rather than the TAP signal timings.
10.Not 100% tested. Specified by design characterization.
Table 27. System Bus AC Specifications (TAP Connection)
1, 2, 3
T# Parameter
Min
Max
Unit
Figure
Notes
T30: TCK Frequency
16.667
MHz
T31: TCK Period
60.0
ns
T32: TCK High Time
25.0
ns
V
REF
+ 0.200 V, 10
T33: TCK Low Time
25.0
ns
V
REF
– 0.200 V, 10
T34: TCK Rise Time
5.0
ns
(V
REF
– 0.200 V) –
(V
REF
+ 0.200 V),
4, 10
T35: TCK Fall Time
5.0
ns
(V
REF
+ 0.200 V) –
(V
REF
– 0.200 V),
4, 10
T36: TRST# Pulse Width
40.0
ns
Asynchronous, 10
T37: TDI, TMS Setup Time
5.0
ns
5
T38: TDI, TMS Hold Time
14.0
ns
5
T39: TDO Valid Delay
1.0
10.0
ns
6, 7
T40: TDO Float Delay
25.0
ns
6, 7, 10
T41: All Non-Test Outputs Valid Delay
2.0
25.0
ns
6, 8, 9
T42: All Non-Test Inputs Setup Time
25.0
ns
6, 8, 9, 10
T43: All Non-Test Inputs Setup Time
5.0
ns
5, 8, 9
T44: All Non-Test Inputs Hold Time
13.0
ns
5, 8, 9