Yamaha HTR-5835 User Guide

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this 
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening 
environment.

■

Use to quickly setup basic system parameters (see page 21).

■

Use to adjust speaker and system settings manually.

Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for 
video signal processing delays when using LCD monitors or projectors.

y

Most of the parameters described in SOUND MENU are set automatically when you perform “BASIC SETUP” (see page 21). You can 
use SOUND MENU to make further adjustmen

ts.

Use to reassign digital input/outputs and select the input mode.

Use to adjust the optional system parameters.

 A)SPEAKER SET

Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over 
frequency.

 B)SP LEVEL

Adjusts the output level of each speaker.

 C)SP DISTANCE

Adjusts the delay time of each speaker.

 D)CENTER GEQ

Adjusts the tonal quality of the center speaker.

 E)LFE LEVEL

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

 F)D.RANGE

Adjusts the dynamic range for Dolby Digital or DTS signals.

 G)AUDIO SET

Customizes the muting level and audio delay.

 A)I/O ASSIGN

Assigns jacks according to the component to be used.

 B)INPUT MODE

Selects the initial input mode of the source.

 C)INPUT RENAME

Changes the name of the inputs.

 A)DISPLAY SET

Adjusts the brightness of the display.

 B)MEMORY GUARD

Locks sound field program parameters and other SET MENU settings.

 C)PARAM. INI

Initializes the parameters of a group of sound field programs.

 D)MULTI ZONE

Specifies the location of the speakers connected to the SPEAKERS B terminals.

 E)XM RADIO SET

Displays the current reception level for the XM Connect and Play digital antenna.