Yamaha htr-5740 User Guide

■

 B)INPUT MODE

Use this feature to designate the input mode for sources 
connected to the DIGITAL INPUT jacks when you turn on 
this unit (see page 31 for details about the input mode).
Choices: 

, LAST

• Select AUTO to allow this unit to automatically detect 

the type of input signal and select the appropriate input 
mode.

• Select LAST to set this unit to automatically select the 

last input mode used for that source.

Even if LAST is selected, the last setting for the EX/ES button 
will not be recalled.

Use to adjust the optional system parameters.

■

 A)DISPLAY SET

  DIMMER

Use to adjust the brightness of the front panel display.
Choices: –4 to 

  V CONV.

Use this feature to turn on/off conversion of composite 
(VIDEO) signals to S-Video signals. This allows you to 
output converted video signals from the S VIDEO jacks 
when no S-Video signals are input.
Choices: 

, OFF

• Select OFF not to convert any signals. 
• Select ON to convert composite signals to S-Video 

signals.

Converted video signals are only output to the MONITOR OUT 
jacks. When recording you must make the same type of video 
connections (i.e., S-Video) between each component.

■

 B)MEMORY GUARD

Use this feature to prevent accidental changes to DSP 
program parameter values and other system settings.
Choices: ON, 

Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
When “MEMORY GUARD” is set to ON, you cannot use 
the test tone or select any other SET MENU items.

00_HTR-5750_U_EN.book  Page 49  Tuesday, February 17, 2004  10:29 AM