Yamaha HTR-6040 User Guide
56
En
SET MENU
■ Input rename B)INPUT RENAME
Use this feature to change the name of the input source
that appears in the OSD and in the front panel display.
Use this feature to change the name of the input source
that appears in the OSD and in the front panel display.
1
Press one of the input selector buttons (A)
to select the input source you want to
change the name of.
2
Set the operation mode selector (
K) to
AMP
and then press Dl / h on the remote
control to place the “_” (underscore) under
the space or the character you want to edit.
control to place the “_” (underscore) under
the space or the character you want to edit.
3
Press Dk / n to select the character you
want to use and then press Dl / h to move
to the next space.
want to use and then press Dl / h to move
to the next space.
• You can use up to 8 characters for each input.
• Press Dn to change the character in the following order,
or press Dk to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, –, +, etc.)
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, –, +, etc.)
4
Repeat steps 1 through 3 to rename each
input source.
input source.
5
Press D
ENTER to exit from “INPUT
RENAME”.
■ Volume trim C)VOLUME TRIM
Use this feature to adjust the output volume of each
source. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD,
Use this feature to adjust the output volume of each
source. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD,
DTV/CBL, V-AUX, DVR, DOCK,
MULTI CH IN, XM
MULTI CH IN, XM
Control range: –6.0 to +6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
You can only adjust the value for DOCK when your iPod is
stationed in the Yamaha Universal Dock connected to this unit.
stationed in the Yamaha Universal Dock connected to this unit.
■ Decoder mode D)DECODER MODE
Decoder select mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select “AUTO” if you want this unit to automatically
detect the type of input signals and select the
appropriate decoder mode.
appropriate decoder mode.
• Select “LAST” if you want this unit to automatically
select the last decoder mode used the connected input
source.
source.
DTS decoder prioritize setting
Choices: AUTO, DTS
• Select “AUTO” if you want this unit to automatically
Choices: AUTO, DTS
• Select “AUTO” if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
input mode.
• Select “DTS” when you play back a DTS-CD.
Notes
B)INPUT RENAME
DVD ->
DVD
[ ]/[ ]:Position
p
[
[ ]/[ ]:Chara.
p
p
2 INPUT MENU
CD
CD-R
DVD
DTV
MD
MULTI CH IN
CBL
TUNER
V-AUX
DOCK
DVR
XM
Note
C)VOLUME TRIM
DVD
DVD
;;;;;;0.0dB
[ ]/[ ]:Adjust
p
[
[RETURN]:Exit
2 INPUT MENU
D)DECODER MODE
. >AUTO LAST
CD
;;;;AUTO
DVD
;;;;AUTO
DTV/CBL
;;;;AUTO
[ ]/[ ]:Up/Down
p
p
[ ]/[ ]:Select
p
[
2 INPUT MENU