Yamaha rx-a2000 User Guide

Target Source
Specify the output level of electronic signal transmitted each time 
input is switched.

Manual
Manually switch the output level for electronic signal transmission. 
This setting can also be used to confirm proper function of the 
external component connected via the TRIGGER OUT 1 or 2 jack.

■

Memory Guard

Prohibits setting changes to prevent careless changes being made 
to the settings on Setup menu.

Select the language used for display of menus and messages.

J3

Choices: English (English), 

 (Japanese), 

 (French), 

 (German), 

 (Spanish), 

 (Russian)

Low

J1

Terminates electronic signal transmission when the 

input source specified with this option is selected.

High (Default)

J2

Electronic signal is transmitted when the input source 

specified with this option is selected.

This setting is available only when “Trigger Mode” is set to 
“Source.”

Low

J1

Stops the electronic signal transmission.

High (Default)

J2

Transmits the electronic signal.

This setting is available only when “Trigger Mode” is set to 
“Manual.”

Off (Default)

Settings are not protected.

On

Prohibits changes to the settings on Setup menu until 

it is returned to “Off.” 

While set to “On,” the unit displays “Memory 

Guard!” when an attempt is made to change the 

settings.

For details on selecting a language, refer to “Language 
selection” (

J

This unit outputs 0 V when selecting “Low.”

J

This unit outputs 12 V when selecting “High.”

J

Content window information is displayed in the language in which that 
information was released.