Yamaha rx-a2000 User Guide

This receiver can transmit selected incoming audio/video signals to external components through the 
AV OUT jacks. You can record these input audio and video signals to VCRs or similar devices, or send 
them to other TVs or external components.

To connect this unit to your network, plug one end of a network cable (CAT-5 or higher straight cable) 
into the NETWORK port of this unit, and plug the other end into one of the LAN ports on your router 
that supports the DHCP (Dynamic Host Configuration Protocol) server function. To enjoy Internet 
Radio or music files saved on PC and DLNA server such as NAS (Network Attached Storage), each 
device must be connected properly in the network.

HDMI audio/video signals and component video signals cannot be transmitted from these jacks.

a

b

c

d

e

f

V

V

R

L

R

L

O

O

S

S

S

S

• Use an STP (shielded twisted pair) cable (commercially available) to connect a network hub or router 

and this unit.

• If the DHCP server function on your router is disabled, you need to configure the network settings 

manually (

a

b

c

d

e

f