Yamaha rx-a3000 User Guide
1
3
2
2
within 20 feet (6 m)
- 1 -
English
Quick Reference Guide
for U.S.A.
Preparing the remote control
■
Accessories
■
Items necessary for connection
The following accessories are supplied with this product.
Speakers
Remote control
Batteries (4)
(AAA, LR03, UM-4)
AM loop antenna
Indoor FM antenna
E.g.
E.g.
Front speaker
E.g.
E.g.
Center speaker
Surround speaker, surround back
speaker, and presence speaker
Active subwoofer
1
Take off the battery compartment cover.
2
Insert the four supplied AAA batteries
into the battery case, following the
polarity markings.
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
back into place.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
control sensor on this unit during operation.
External components
TV
Cable
• Cables for connecting external components
(may differ depending on the components you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
Playback device such as
BD (Blu-ray Disc)/DVD players
• Use speakers with an impedance of at least 6 Ω. 4 Ω speakers can also be used as the front speakers. For more information on speaker
impedance, refer to page 3.
• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
• Prepare at least two front speakers. The priority of the other speakers is as follows:
• Prepare at least two front speakers. The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker (s)/presence speakers
2 One center speaker
3 One (or two) surround back speaker (s)/presence speakers
YPAO microphone
Microphone base
Power cable
✽
Simple remote
control
* The fi gure of the supplied power cable may differ depending upon regions.