Yamaha RX-V1065 User Guide

Select the desired input source/sound field 
program and then press and hold PSCENE (or 
hSCENE) key to edit until “SET Complete” 
appears on the front panel display.

y

• If you change the input source setting, register the remote control code of 

an external component to the input source (page 63).

You can operate an external component with the remote 
control of this unit by setting a remote control code for the 
external component for each input source. Setting remote 
control codes for desired input sources allows you to 
switch between external components linked to scene 
selections.

• This feature is not available for TUNER, SIRIUS and XM input 

sources.

While holding down the desired hSCENE 
key, press and hold the dInput selection 
key to which you registered a remote control 
code in step 1.
From now on the external component can be remotely 
controllable just by selecting a scene.

Press iON SCREEN on the remote control.
The GUI screen appears on the video monitor.

Use jCursor k / n repeatedly to switch the 
page and jCursor l / h repeatedly to 
select the desired input source.

y

• If an input source you want to select is available in “Select Scene”, you 

can select the desired input source and sound field program at once.

Press jENTER.

Press uMUTE on the remote control to mute 
the audio output.
The MUTE indicator on the front panel display 
flashes while audio output is muted.

Press uMUTE again to resume audio 
output.

You can adjust the balance of the high frequency range 
(Treble) and low frequency range (Bass) of sounds output 
from the front left and right speakers to obtain desired 
tone.

Press MTONE CONTROL on the front panel 
repeatedly to select “Treble” or “Bass”.
The current setting is displayed on the front panel 
display.

Rotate the NPROGRAM selector to adjust 
the frequency range.
Control range: –10.0 dB to +10.0 dB
The display returns to the previous screen 
automatically in few seconds.

• The tone control settings are not effective when this unit is in the Pure 

Direct mode or “MULTI CH” is selected as an input source.

• If you set the balance extremely off, sounds may not match those from 

other channels well.

Use Pure Direct mode to enjoy the pure high fidelity 
sound of the selected source. When Pure Direct mode is 
activated, this unit plays back the selected source with the 
least circuitry.

BD/DVD, TV, CD, RADIO

USB, DOCK, SIRIUS, XM, 

TUNER, PHONO, V-AUX, 

MULTI CH

HDMI1-4, AV1-6, AUDIO1/2

Treble

0.0dB