Yamaha RX-V1065 User Guide

The FM/AM tuner of this unit provides the following two 
modes for tuning.

■ Frequency tuning mode
You can tune in to a desired FM/AM station by searching 
or specifying its frequency.

■ Preset tuning mode
You can preset the frequencies of FM/AM stations by 
registering them to specific numbers, and later just select 
those numbers to tune in.

• Adjust the FM/AM antennas connected to this unit for the best reception.

Rotate the RINPUT selector (or press 
dTUNER) to select “TUNER” as the input 
source.

Press GFM (eFM) or GAM (eAM) to select 
a band.
“FM” or “AM” appears on the front panel display 
according to the band that you have selected.

Press HTUNING/CH l / h (or eTUN./CH 
k / n) to specify the frequency.
To adjust the frequency to a higher range, press h (or 
k). To adjust it to the lower range, press l (or n). 
The TUNED indicator on the front panel display 
lights up when the tuner is tuned in to a station. The 
STEREO indicator also lights up if the program being 
broadcasted is in stereo.

The frequency changes in the following manner according 
to how you press HTUNING/CH l / h (or eTUN./
CH k / n).

When you press the key more than 1 second
The tuner searches the frequency of a station that is 
detectable around the current frequency. This is effective 
when the tuner can receive strong signals without any 
interference. Once the search starts, release the key. 
When you keep holding the key, the search continues even 
when a station is detected. This is useful when you want to 
tune in to a specific station.

When you press and release the key
The tuner increases or decreases the frequency in steps. 
Use this method when the tuner cannot receive strong 
signals and stations are skipped during the search.

y

• You can switch between stereo and monaural for FM broadcast in the 

Option menu (page 48).

• (U.S.A. model only)

When tuning in to an HD Radio station, the HD indicator lights up. See 
page 31 for details about the HD Radio features.

To tune in by direct frequency tuning, press 
lNumeric keys to enter the frequency of 
the station.
Enter only integers. For example, if you want to set 
the frequency to 88.9 MHz, enter “889”.

• When you press lNumeric keys during preset tuning, a 

preset number is selected. Set tuning mode to frequency tuning 
mode using HTUNING/CH l / h (or eTUN./CH k / n) 
prior to the operation.

• “Wrong Station!” appears on the front panel display when you 

enter a frequency that is out of receivable range. Make sure that the 
entered frequency is correct.

You can register up to 40 FM/AM stations (Preset).

The tuner automatically detects FM stations with strong 
signals and registers up to 40 stations. To register AM 
stations, use manual station preset.

(U.S.A. model only)
You can register up to 40 FM HD Radio, AM HD Radio 
and analog FM radio stations with strong signals.

• (U.S.A. model only)

If you register an FM HD Radio station with this feature, only the main 
audio program of the station (HD1) will be stored. To store other audio 
program, preset the station manually.

Rotate the RINPUT selector (or press 
dTUNER) to select “TUNER” as the input 
source.

Press rOPTION on the remote control.
The Option menu for “TUNER” is displayed 
(page 47).

Select “Auto Preset” and then press 
jENTER.

Automatic station preset starts about 5 seconds later 
from the lowest frequency upwards.

FM92.5MHz

Auto Preset