Yamaha RX-V1600 Owner's Manual

Press the buttons for the functions you want 
to include in the macro operation in 
sequence.
You can set up to 10 steps (10 functions). After you 
have set 10 steps, FULL appears and the remote 
control automatically exits the macro mode.

To change the selected source component, press 

SELECT k / n

. Pressing the input selector buttons will 

program a macro step, whereas 

SELECT k / n

 only changes 

the selected component and corresponding component control 
area.

ERROR appears in the display window if you press a button 
not indicated in the respective step, or if you press more than 
one button simultaneously.

You can clear all changes made in each function set, such 
as learned functions, macros, renamed source names and 
setup remote control codes.

■ Basic CLEAR operations

Press CLEAR by using a ballpoint pen or 
similar object.
CLEAR appears in the display window.

If you do not complete each of the following steps within 30 
seconds, the clearing mode will be automatically canceled. 
In this case, press CLEAR again.

Press k / n to select the clear mode.

L;CD

Clears all learned functions in the respective 
component control area. Press an input selector 
button to select the component.

L;AMP

Clears all learned functions for this unit’s control 
area.

L;ALL

Clears all learned functions.

M;ALL

Clears all programmed macros.

RNAME Clears all renamed source names.
FCTRY

Clears all remote functions and returns the remote 
to the factory settings.

The name of a component is shown after a semicolon (;).

Press and hold CLEAR again for about 3 
seconds.
WAIT appears in the display window. If clearing was 
successful, C;OK appears in the display window.

y

Once you have cleared a learned function for a button, the 
button reverts to the factory setting (or to the manufacturer 
setting, if you have set remote control codes).

L;ALL and FCTRY may take about 30 seconds to complete.

Memory back-up
The memory back-up circuit prevents the stored data 
from being lost. However, the stored data will be lost 
in case the power cord is disconnected from the AC 
wall outlet for more than one week.

CLEAR

CLEAR