Yamaha RX-V1600 Owner's Manual

y

• You must complete this step within 5 seconds while the 

selected zone flashes in the front panel display. Otherwise, 
the currently selected zone mode is automatically 
canceled. In this case, press ZONE CONTROL again.

• The initial setting is ZONE2 when both Zone 2 and Zone 3 

are turned on.

Proceed to “Controlling Zone 2 and Zone 3” 
on page 106 for detailed information on the 
Zone 2 and Zone 3 control functions.

■ Remote control operations

Press SELECT k repeatedly to select the 
zone you want to control.
ZONE 2 or ZONE 3 is displayed in the display 
window.

Proceed to “Controlling Zone 2 and Zone 3” 
for detailed information on the Zone 2 and 
Zone 3 control functions.

Press SELECT k / n to exit from the 
Zone 2/Zone 3 mode.

• The input source of Zone 2 and the source available for 

recording are always the same.

• ZONE 2 or ZONE 3 appears in the display window only 

when k is pressed, and ALL appears only when n is 
pressed.

Once the zone you want to control is selected as described 
in “Selecting Zone 2 or Zone 3” on page 105, you can 
control Zone 2 and Zone 3 by using the control buttons on 
the front panel or on the remote control. The available 
operations are listed as follows:
• Selecting the input source of Zone 2 or Zone 3
• Adjusting the volume level of Zone 2 or Zone 3
• Adjusting the tonal quality of Zone 2 or Zone 3
• Tuning into FM or AM when TUNER is selected as the 

input source of Zone 2 or Zone 3

• Tuning into the XM Satellite Radio when XM is 

selected as the input source of Zone 2 or Zone 3

■ Selecting the input source of Zone 2 or 

Use the INPUT selector on the front panel (or 
press one of the input selector buttons on the 
remote control) to select the input source of the 
selected zone.
If the remote control is used to select the input source, “2: 
name of the selected input source” or “3: name of the 
selected input source” is displayed in the display window 
when Zone 2 or Zone 3 is selected respectively.

• Select TUNER as the input source to use the TUNER 

features in the selected zone. For details about the 
TUNER operations, see “FM/AM TUNING” on 
page 46.

• Select XM as the input source to use the XM Satellite 

Radio features in the selected zone. For details about 
the XM Satellite Radio operations, see “XM® 
SATELLITE RADIO TUNING” on page 52.

The selected input source is shared across all zones.

y

You must complete this step within 5 seconds while the selected 
zone flashes in the front panel display. Otherwise, the currently 
selected zone mode is automatically canceled. In this case, press 
ZONE CONTROL on the front panel again.