Yamaha RX-V1600 Owner's Manual

You can switch between the available OSD modes and manually adjust the output level of each speaker.

You can display the operating information of this unit on a 
video monitor. If you display the SET MENU and sound 
field program parameter settings on a monitor, it is much 
easier to see the available options and parameters than it is 
to read the information in the front panel display.

Turn on the video monitor connected to this unit 
and then press ON SCREEN on the remote 
control repeatedly to change the OSD mode.
The OSD mode changes in the following order: 
Full display 

→ Short display → Display off

Full display
Fully shows the sound field program parameter settings as 
well as the contents of the front panel display.

Short display
Briefly shows the contents of the front panel display at the 
bottom of the screen each time you operate this unit.

Display off
Only the operations performed using ON SCREEN on the 
remote control are displayed. However, the OSD is 
displayed when using SET MENU or the test tone feature 
even if the OSD mode is turned off.

• The OSD signal is not output at the OUT (REC) jack and will 

not be recorded.

• You can display a gray background in the OSD when there is no 

video signal being input by setting GRAY BACK to AUTO 
(see page 85).

• The OSD is not displayed in the following cases:

– When video signals in the progressive format or HDTV video 

signals are being input.

– When the signals input at the HDMI IN 1 or HDMI IN 2 jack 

are being output at the HDMI OUT jack.

– When V CONV. is set to OFF (see page 85).

You can manually adjust the output level of each speaker 
while listening to a music source. This is also possible 
when playing sources through the MULTI CH INPUT 
jacks.

This operation will override the level adjustments made in AUTO 
SETUP (see page 32) and SP LEVEL (see page 80).

FRONT L adjusts the front left speaker level.
CENTER adjusts the center speaker level.
FRONT R adjusts the front right speaker level.
SUR.R adjusts the surround right speaker level.
SB R adjusts the surround back right speaker level.
SB L adjusts the surround back left speaker level.
SUR.L adjusts the surround left speaker level.
SWFR adjusts the subwoofer level.
PRNS L adjusts the presence left speaker level.
PRNS R adjusts the presence right speaker level.

Press l / h to adjust the speaker output 
level.
Control range: +10 dB to –10 dB

MUSIC

    P . I N I T . D L Y

;;21ms

    P . R O O M   S I Z E

;;1.0

    S . I N I T . D L Y

;;31ms

    S . R O O M   S I Z E

;;1.0

.

            P o p / R o c k

    D S P   L E V E L

;;;;0dB

M U S I C

    P o p / R o c k