Yamaha RX-V2700 Owner's Manual
86
En
ADVANCED SOUND CONFIGURATIONS
■
Selecting decoders for multi-channel
sources
sources
If you connected surround back speakers, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital EX
or DTS-ES decoders.
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital EX
or DTS-ES decoders.
1
Set the operation mode selector to AMP and
then press EXTD SUR. on the remote control
repeatedly to switch between 5.1 and 6.1/7.1-
channel playback.
then press EXTD SUR. on the remote control
repeatedly to switch between 5.1 and 6.1/7.1-
channel playback.
2
Press
l
/
h
repeatedly to select a decoder
while the name of the decoder is displayed.
Auto
AUTO
When a signal flag that can be recognized by this unit is
input, this unit selects the optimum decoder to play back
the signal in 6.1/7.1 channels.
If this unit cannot recognize the flag or no flag is present
in the input signal, it cannot automatically be played in
6.1/7.1 channels.
input, this unit selects the optimum decoder to play back
the signal in 6.1/7.1 channels.
If this unit cannot recognize the flag or no flag is present
in the input signal, it cannot automatically be played in
6.1/7.1 channels.
Decoders
You can select from the following decoders depending on
the format of the source you are playing.
the format of the source you are playing.
Off
OFF
Decoders are not used to create 6.1/7.1 channels.
• “PLIIx Movie” is available only when “Surround Back” (
) is set to “Small x2” or “Large x2”.
• Some 6.1/7.1-channel compatible discs do not have a signal flag
that can be automatically detected by this unit. When playing
these kinds of discs in 6.1/7.1 channels, select a decoder
manually from “PLIIx Music”, “EX/ES” or “EX”.
these kinds of discs in 6.1/7.1 channels, select a decoder
manually from “PLIIx Music”, “EX/ES” or “EX”.
• 6.1/7.1-channel playback is not possible even if you press
EXTD SUR. in the following cases:
– when “Surround” (see page 106) or “Surround Back” (
– when “Surround” (see page 106) or “Surround Back” (
) is set to “None”.
– when the component connected to the MULTI CH INPUT
jacks is being played.
– when the source being played does not contain surround left
and right channel signals.
– when a Dolby Digital KARAOKE source is being played.
– when the “2ch Stereo” (see page 53) or Pure Direct (see
– when the “2ch Stereo” (see page 53) or Pure Direct (see
page 52) mode is selected.
• When this unit is turned off, this setting will be reset to “Auto”.
• The Pro Logic IIx decoder is not available when “Surround
• The Pro Logic IIx decoder is not available when “Surround
Back” is set to “None” (see page 106).
8
EXTD SUR.
TV
SOURCE
AMP
A/B/C/D/E
PRESET/CH
ENTER
Decoder
Functions
PLIIxMovie
q
D+PLIIx Movie
DTS+PLIIx Movie
MPCM+PLIIx Movie
DSD+PLIIx Movie
MPCM+PLIIx Movie
DSD+PLIIx Movie
Plays back multi-channel
sources in 7.1 channels using
the Pro Logic IIx movie
decoder.
sources in 7.1 channels using
the Pro Logic IIx movie
decoder.
PLIIxMusic
q D+PLIIx Music
DTS+PLIIx Music
MPCM+PLIIx Music
DSD+PLIIx Music
q D+PLIIx Music
DTS+PLIIx Music
MPCM+PLIIx Music
DSD+PLIIx Music
Plays back multi-channel
sources in 6.1/7.1 channels
using the Pro Logic IIx music
decoder.
sources in 6.1/7.1 channels
using the Pro Logic IIx music
decoder.
DTS ES
DTS 96/24 ES
DTS 96/24 ES
Plays back DTS signals in 6.1/
7.1 channels using the DTS-ES
decoder.
7.1 channels using the DTS-ES
decoder.
DOLBY D EX
DTS+DOLBY EX
MPCM+DOLBY EX
DSD+DOLBY EX
DTS+DOLBY EX
MPCM+DOLBY EX
DSD+DOLBY EX
Plays back multi-channel
sources in 6.1/7.1 channels
using the Dolby Digital EX
decoder.
sources in 6.1/7.1 channels
using the Dolby Digital EX
decoder.
Notes