Yamaha RX-V550 Owner's Manual
57
English
ZONE 2 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
A
D
V
ANCED
OPERA
T
ION
■
When you have finished using the unit
To set both the main unit and Zone 2 to standby
mode
mode
While holding down AMP, press STANDBY.
y
• You can turn on both the main unit and Zone 2 simultaneously
by holding down AMP and pressing SYSTEM POWER.
• SYSTEM POWER and STANDBY work differently depending
on the selected mode.
■
Special considerations for DTS software
The DTS signal is a digital bitstream. If you attempt to
send the DTS signal to the second room you will only hear
digital noise (that may damage your speakers). Thus, the
following considerations and adjustments need to be made
when playing DTS-encoded discs.
send the DTS signal to the second room you will only hear
digital noise (that may damage your speakers). Thus, the
following considerations and adjustments need to be made
when playing DTS-encoded discs.
For DVDs encoded in DTS
Only 2 channel analog audio signals may be sent to the
second room.
Use the disc menu to set the DVD player’s mixed 2-
channel left and right audio outputs to the PCM or Dolby
Digital soundtrack.
second room.
Use the disc menu to set the DVD player’s mixed 2-
channel left and right audio outputs to the PCM or Dolby
Digital soundtrack.
For CDs encoded in DTS
To avoid unexpected noise, DO NOT USE the Zone 2
feature with CDs encoded in DTS.
feature with CDs encoded in DTS.
TRANSMIT
indicator
SYSTEM POWER/
STANDBY
Main mode
Off
Turns the main unit
on/standby
on/standby
Zone 2 mode
On
Turns Zone 2 to on/
standby
standby
00_RXV550_U_EN.book Page 57 Tuesday, February 17, 2004 9:21 AM