Yamaha RX-V563 User Guide

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, 
this unit cannot reproduce the input sources accurately.

Caution
• Before connecting the speakers, make sure that the AC power plug is disconnected from the AC wall outlet.
• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage 

this unit and/or the speakers. If the speaker wires are short-circuited, “CHECK SP WIRES” appears in the front 
panel display when you turn on this unit.

• Use the magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the 

speakers away from the monitor.

• If you are to use 6 ohm speakers, be sure to set “SP IMP.” to “6

Ω MIN” before using this unit. For details about the 

speaker impedance setting, see page 23.

When you use single surround 
back speaker, connect the 
speaker to the left SURROUND 
BACK terminal (SINGLE).

Connect the alternative front speaker system 
(FRONT B).

01EN_RX-V563_U.book  Page 11  Thursday, January 31, 2008  10:28 AM