Yamaha RX-V300K Owner's Manual

Turn up the volume.

You will hear a test tone (like pink noise) from the left main
speaker, then the center speaker, then the right main
speaker, and then the rear speakers, for about two seconds
each.  The display changes as shown below.

*

The test tone from the left rear speaker and the right
rear speaker will be heard at the same time.

Adjust the BALANCE control so that the effect sound
output level of the left main speaker and the right main
speaker are the same.

Adjust the sound output levels of the center speaker
and the rear speakers so that they become almost as
same as that of the main speakers.

Cancel the test tone.

●

Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using the
VOLUME control (or the VOLUME keys on the remote
control transmitter) only.

●

If you use external power amplifiers, you may also use their
volume controls to achieve proper balance.

●

In step 9, if the center channel mode is in the “PHANTOM”
position, the sound output level of the center speaker
cannot be adjusted.  This is because in this mode, the
center sound is automatically output from the left and right
main speakers.

18

Disappears.

Main (L)

Main (R)

Center

Rear (L and R)