Yamaha RX-V300K Owner's Manual

27

Follow steps 1 – 6 shown in “BASIC OPERATIONS” on
page 19.

Select the desired program that is suitable for the
source.

The selected program name is shown on the display.

If desired, adjust the delay time and the output level of
each speaker.  (For details, refer to the corresponding
descriptions on page 28.)

●

If you prefer to cancel the DSP, press the SUR/KARAOKE
EFFECT button on the front panel or the EFFECT ON/OFF
key on the remote control transmitter.  The sound will be the
normal 2-channel stereo without surround sound effect.

●

When LIVE HOUSE, HALL, BALLAD, POPS, JAZZ or
ROCK is selected, no sound is heard from the center
speaker.

●

When a monaural sound source is played with DOLBY PRO
LOGIC or DOLBY 3 STEREO, no sound is heard from the
main speakers and the rear speakers.  Sound is heard only
from the center speaker.  However, if the center channel
mode is in PHANTOM, the main speakers output the sound
of the center channel.

●

When this unit’s Dolby Pro Logic Surround decoder is used,
if the main-source sound is considerably altered by
overadjustment of the BASS or TREBLE control, the
relationship between the center and rear channels may
produce an unnatural effect.

To select a DSP program on the remote control transmitter
First turn the DSP on so that a program name appears on the
display by pressing the EFFECT ON/OFF key. Next,  select a
desired DSP program by pressing the 

or 

side of

PROGRAM key.

* Pressing the 

PROLOGIC or 

3 STEREO key turns

the DSP on and selects the corresponding program directly.