Yamaha RX-V363 User Guide

The “BASIC SETUP” feature is a useful way to set up your system quickly and with minimal effort.

• Make sure you disconnect your headphones from this unit.
• If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in “SOUND MENU” 

(see page 45).

• Altering any parameters in “BASIC SETUP” resets all parameters manually adjusted in “SOUND MENU” (see page 45).
• Initial settings are indicated in bold under each parameter.
• Press 8RETURN on the remote control to return to the previous menu level.

Press 4

AMP on the remote control. 

Press H

MENU.

“BASIC SETUP” appears in the front panel display.

Press 7

ENTER to enter “BASIC SETUP”.

“ROOM” appears in the front panel display.

 ROOM:  S >M  L

Press 7l / h to select the desired setting.
Select the size of the room where you have installed 
your speakers. In general, the room sizes are defined 
as follows:

Choices: S, M, L

[U.S.A. and Canada models]
S (small)

16 x 13 ft, 200 ft

2

 (4.8 x 4.0 m, 20 m

2

)

M (medium) 20 x 16 ft, 300 ft

2

 (6.3 x 5.0 m, 30 m

2

)

L (large)

26 x 19 ft, 450 ft

2

 (7.9 x 5.8 m, 45 m

2

)

[Other models]
S (small)

3.6 x 2.8 m, 10 m

2

M (medium) 4.8 x 4.0 m, 20 m

2

L (large)

6.3 x 5.0 m, 30 m

2

Press 7n to select “SUBWOOFER” and then 
7l / h to select the desired setting.

Choices: YES, NONE
• Select “YES” if you have a subwoofer in your 

system.

• Select “NONE” if you do not have a subwoofer in 

your system.

Press 7n to select “SPEAKERS” and then 
7l / h to select the number of speakers 
connected to this unit.

BASIC SETUP  

.

2spk

Front L/R

3spk

Front L/R, Center

4spk

Front L/R, Surround L/R

Front L/R, Center, Surround L/R

SUBWOOFER  

..YES

SPEAKERS  

..5spk

01EN_RX-V363_U.book  Page 22  Thursday, January 31, 2008  3:52 PM