Yamaha RX-V363 User Guide

Use this menu to adjust the optional system parameters.

■ Display settings

A)DISPLAY SET

  DIMMER

Use this feature to adjust the brightness of the front panel 
display.
Control range: – 4 to 0
Control step: 1
• Press 7l to make the front panel display dimmer.
• Press 7h to make the front panel display brighter.

■ Memory guard

B)MEMORY GUARD

MEM.GUARD

Use this feature to prevent accidental changes to DSP 
program parameter values and other system settings.
Choices: OFF, ON
• Select “OFF” to turn off the “MEM.GUARD” feature.
• Select “ON” to protect:

– sound field program parameters
– all set menu items
– all speaker levels
– SCENE template parameters

When “MEM.GUARD” is set to “ON”, you cannot select and 
adjust any other set menu items.

■ Audio select 

C)AUDIO SELECT

Use this feature to designate the default audio input jack 
select setting for the input sources when you turn on the 
power of this unit.
Choices: AUTO, LAST
• Select “AUTO” if you want this unit to automatically 

detect the type of input signals and select the 
appropriate input mode.

• Select “LAST” if you want this unit to automatically 

select the last input mode used for the connected input 
source (see page 31).

■ Parameter initialization

D)PARAM. INI

Use this feature to set all the parameters of the sound field 
programs to the initial factory settings.
Choices: NO, YES
• Select “NO” to cancel the parameter initialization and 

return to the previous menu level.

• Select “YES” to set all the sound field parameters to 

the initial factory settings.

• You cannot automatically revert to the previous parameter 

settings once you initialize the sound field program parameters.

• You cannot separately initialize individual sound field 

programs.

■ Bluetooth setting

E)BLUETOOTH

START PAIRING

Use this feature to start pairing the connected Yamaha 
Bluetooth adapter (such as YBA-10, sold separately) with 
your Bluetooth component. For details about the pairing, 
refer to “Pairing the Bluetooth™ adapter and your 
Bluetooth™ component” on page 41.

Select “START PAIRING” in “BLUETOOTH” 
and then press 7

ENTER to start pairing.

The connected Bluetooth adapter starts searching 
Bluetooth components. “Searching...” appears in the 
front panel display.

Check that the Bluetooth component detects 
the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter, 
“YBA-10 YAMAHA” (example) appears in the 
Bluetooth device list.

Select the Bluetooth adapter in the Bluetooth 
device list and then enter the pass key 
“0000” on the Bluetooth component. 
Once this unit completes the pairing successfully, 
“Completed” appears.

y

To cancel the pairing, press 8RETURN to exit from 
“START PAIRING”.

Press 8

RETURN to exit from “START 

• If the connected Bluetooth adapter cannot find any Bluetooth 

components, “Not found” appears.

• If a Bluetooth adapter is not connected to this unit, “No BT 

adapter” appears.

To ensure security, a time limit of 8 minutes is set for 
the pairing operation. You are recommended to read 
and fully understand all the instructions before starting.

01EN_RX-V363_U.book  Page 50  Thursday, January 31, 2008  3:52 PM