Yamaha RX-V3900 User Guide

When “Zone2 Volume” or “Zone3 Volume” is set to “Fixed”, 
you cannot select the following parameters: 
– Zone2 Max Vol./Zone3 Max Vol.
– Zone2 Initial Vol./Zone3 Initial Vol.

Zone2 Max Vol./Zone3 Max Vol. 
(Zone 2/Zone 3 Maximum volume setting)
Use this feature to set the maximum volume level in the 
Zone 2 or Zone 3.
Control range: –30.0 dB to +15 .0 dB, +16.5 dB
Control step: 5.0 dB

The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes 
priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.” 
setting.

Zone2 Initial Vol./Zone3 Initial Vol. 
(Zone 2/Zone 3 initial volume setting)
Use this feature to set the volume level of Zone 2 or Zone 
3 when the power of each zone is turned on.
Control range: Off, Mute, –80.0 dB to +16.5 dB
Control step: 0.5 dB

The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes 
priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.” 
setting.

Zone2 Balance/Zone3 Balance 
(Zone 2/Zone 3 balance)
Use this feature to adjust the balance of the volume of the 
left and right channels in each zone.
Choices: L10 to L1, 0, R1 to R10

Zone2 Tone Control/Zone3 Tone Control 
(Zone 2/Zone 3 tone control)
Use this feature to adjust the balance of bass and treble 
output to the selected zone.
Choices: Bass (Bass control), Treble (Treble control)
Control range: –10.0 dB to +10.0 dB
Initial setting: 0.0 dB

Zone2 Muting Type/Zone3 Muting Type 
(Zone 2/Zone 3 muting type)
Use this feature to adjust how much the mute function 
reduces the output volume of the selected zone.

■ Zone OSD (Zone on-screen display)

Use this feature to display the operational status of Zone 2 
and Zone 3 on the Zone 2 video monitor connected to the 
ZONE VIDEO jacks on the rear panel of this unit.

■ Zone Rename (Zone Rename)

Main/Zone2/Zone3
(Main/ Zone 2/ Zone 3 rename)
Use this feature to edit the name of the selected zone.

Press 9 k / n / l / h to select a character or 
function and then press 9

ENTER to 

confirm the selection.
Repeat step 1 until you input a name you want to use.

Press 9 k / n / l / h to select “OK” and then 
press 9

ENTER.

y

• To reset the name, select “RESET” and then press 

9ENTER.

• To cancel the operation without change, select 

“CANCEL” and then press 9ENTER.

This menu adjusts the optional system settings.

■ Memory Guard (Memory guard)

Use this feature to prevent accidental changes to sound 
field program parameter values and other system settings.

y

When “Memory Guard” is set to “On”, “

” appears on the left 

side of the name of a parameter being protected.

Mutes all the audio output.

–20dB

Reduces the current volume by 20 dB.

–40dB

Reduces the current volume by 40 dB.

Off

Turns off the zone on-screen display feature.

Zone2

Displays the operational status of Zone 2 only.

Displays the operational status of Zone 2 and 
Zone 3.

Turns off the “Memory Guard” feature.

On

Protects the following parameters:

– sound field program parameters
– GUI menu parameters
– speaker levels settings