Yamaha RX-V3900 User Guide
38
En
Playback
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
analog audio cable plug to the PHONES jack on
the front panel.
y
When you select a sound field program, SILENT CINEMA
mode activates automatically (page 45).
mode activates automatically (page 45).
• When you connect headphones, no signals are output at the
speaker terminals.
• All digital multi-channel audio signals are mixed down to the
left and right headphone channels.
• When “MULTI CH” is selected as the input source, only the
signals input at the MULTI CH INPUT FRONT jacks are
output.
output.
Press L
MUTE on the remote control to mute the
audio output. Press L
MUTE again to resume
the audio output.
y
• The VOLUME level indicator flashes while the mute function is
on.
• You can configure the muting level with “Muting Type”
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
bit rate and flag data of the current input signal.
1
Set the operation mode selector to F
AMP
and then press 8
STATUS on the remote
control.
The input source information screen appears in the
GUI screen.
The input source information screen appears in the
GUI screen.
2
Press 9l / h to toggle between the audio
and video information.
and video information.
3
Press 8
STATUS on the remote control
again to exit from the input source
information screen.
information screen.
■ Audio information
• “–––” appears when this unit cannot display the corresponding
information.
• Some high definition audio bitstream contents may not include
the discrete surround back left and right channel signals but are
encoded at the bitrate of 192 kHz.
encoded at the bitrate of 192 kHz.
• Even if you make settings to output bitstreams directly, some
players convert the Dolby TrueHD or Dolby Digital Plus
bitstreams to the Dolby Digital bitstreams, while converting the
DTS-HD Master Audio or DTS-HD High Resolution Audio
bitstreams to the DTS bitstreams.
bitstreams to the Dolby Digital bitstreams, while converting the
DTS-HD Master Audio or DTS-HD High Resolution Audio
bitstreams to the DTS bitstreams.
Using your headphones
Notes
Muting the audio output
MASTER
PURE DIRECT
VOLUME
MAIN ZONE
INPUT
OFF
ON
INFO
ZONE ON/OFF
ZONE CONTROLS
MULTI ZONE
MIC
OPTIMIZER
EFFECT
PROGRAM
YPAO
ZONE 3
R
L
OPTICAL
ZONE 2
AUDIO
VIDEO AUX
SILENT CINEMA
S VIDEO
VIDEO
PHONES
BAND
CATEGORY
PRESET/TUNING/CH
MONO
STEREO/
MODE
SEARCH
MEMORY
STRAIGHT
MENU
REC OUT
AUDIO SELECT/
CONTROL
TONE
ENTER
ON/OFF
USB
Displaying the input source
information
information
Format
Signal format. When this unit cannot detect a
digital signal, it automatically switches to
analog input.
digital signal, it automatically switches to
analog input.
Sampling
The number of samples per second taken from
a continuous signal to make a discrete signal.
a continuous signal to make a discrete signal.
Channel
The number of source channels in the input
signal (front/surround/LFE). For example, a
multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is
displayed as “3/2/0.1”.
signal (front/surround/LFE). For example, a
multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is
displayed as “3/2/0.1”.
Bitrate
The number of bits passing a given point per
second.
second.
Dialogue
The dialogue normalization level preset to the
current input bitstream signal.
current input bitstream signal.
Flag1/Flag2
Flag data encoded in the bitstream, or PCM
signals that cue this unit to automatically
switch decoders.
signals that cue this unit to automatically
switch decoders.
Notes