Yamaha RX-V450 Owner's Manual

Recording adjustments and other operations are 
performed from the recording components. Refer to the 
operating instructions for those components.

y

Do a test recording before you start an actual recording.

• When this unit is set in the standby mode, you cannot record 

between other components connected to this unit.

• The setting of CONTROL, VOLUME, “SP LEVEL” (page 47) 

and the sound field programs does not affect recorded material.

• A source connected to the MULTI CH INPUT jacks of this unit 

cannot be recorded.

• Digital signals input to the DIGITAL INPUT jacks are not 

output to the analog AUDIO OUT (L/R) jacks for recording. 
You can only record analog signals.

• A given input source is not output on the same REC OUT 

channel. (For example, the signal input from VCR IN is not 
output on VCR OUT.)

• Check the copyright laws in your country to record from 

records, CDs, radio, etc. Recording of copyrighted material may 
infringe copyright laws.

■

The DTS signal is a digital bitstream. Attempting to 
digitally record the DTS bitstream will result in noise 
being recorded. Therefore, if you want to use this unit to 
record sources that have DTS signals recorded on them, 
the following considerations and adjustments need to be 
made.
For DVDs and CDs encoded with DTS, when your player 
is compatible with the DTS format, follow its operating 
instructions to make a setting so that the analog signal will 
be output from the player.

l

h

l

h

If you playback a video source that uses scrambled or 
encoded signals to prevent it from being dubbed, the 
picture itself may be disturbed due to those signals.

00_RXV450_U_EN.book  Page 38  Monday, February 16, 2004  7:03 PM