Yamaha RX-V663 User Guide
86
En
Customizing this unit (MANUAL SETUP)
Front speakers
FRONT SP
When “LFE/BASS OUT” is set to “FRONT”, you can select only
“LARGE” in “FRONT SP”. If the value of “FRONT SP” is set to
other than “LARGE” in advance, this unit change the value to
“LARGE” automatically.
“LARGE” in “FRONT SP”. If the value of “FRONT SP” is set to
other than “LARGE” in advance, this unit change the value to
“LARGE” automatically.
Center speaker
CENTER SP
When the center speaker is large:
Select “LARGE” (large).
Select “LARGE” (large).
When the center speaker is small:
Select “SMALL” (small).
Select “SMALL” (small).
When you do not use the center speaker:
Select “NONE” (none). The center channel signals are
directed to the front left and right speakers.
Select “NONE” (none). The center channel signals are
directed to the front left and right speakers.
Surround left/right speakers
SUR. L/R SP
Surround back left/right speakers
SUR.B L/R SP
SUR.B L/R SP
If the Dolby TrueHD audio signals are input and “SUR.B L/R
SP” is set to “NONE”, the left and right surround back channels
are not directed to the surround left and right speakers.
SP” is set to “NONE”, the left and right surround back channels
are not directed to the surround left and right speakers.
Measure for the speaker size
The woofer section of a speaker is
The woofer section of a speaker is
– 16 cm (6.5 in) or larger: large
– smaller than 16 cm (6.5 in): small
– smaller than 16 cm (6.5 in): small
Choice
Descriptions
LARGE
Select this setting when the front speakers are
large.
large.
SMALL
Select this setting when the front speakers are
small.
small.
Note
Choice
Descriptions
LARGE
Select this setting when the center speaker is
large.
large.
SMALL
Select this setting when the center speaker is
small.
small.
NONE
Select this setting when you do not use the center
speaker. The center channel signals are directed
to the front left and right speakers.
speaker. The center channel signals are directed
to the front left and right speakers.
A)SPEAKER SET
FRONT SP
SMALL >LARGE
A)SPEAKER SET
CENTER SP
NONE >SMALL LARGE
Choice
Descriptions
LARGE
Select this setting when the surround speakers
are large.
are large.
SMALL
Select this setting when the surround speakers
are small.
are small.
NONE
Select this setting when you do not use the
surround speakers. This unit is set to the Virtual
CINEMA DSP mode (see page 51), and “SUR.B
L/R SP” is automatically set to “NONE”.
surround speakers. This unit is set to the Virtual
CINEMA DSP mode (see page 51), and “SUR.B
L/R SP” is automatically set to “NONE”.
Choice
Descriptions
LRGx1
Select this setting when the single surround back
speaker is large.
speaker is large.
LRGx2
Select this setting when the surround back left
and right speakers are Large.
and right speakers are Large.
SMLx1
Select this setting when the single surround back
speaker is small.
speaker is small.
SMLx2
Select this setting when the surround back left
and right speakers are small.
and right speakers are small.
NONE
Select this setting when you do not use the
surround back speakers. The surround back
channel signals are directed to the surround left
and right speakers.
surround back speakers. The surround back
channel signals are directed to the surround left
and right speakers.
Note
A)SPEAKER SET
SUR. L/R SP
NONE >SMALL LARGE
A)SPEAKER SET
SUR.B L/R SP
SMLx1 >SMLx2 LRGx1