Yamaha RX-Z11 User Guide

■ Adjusting the tonal quality of Zone 2, Zone 3, or 

Q

TONE CONTROL on the front panel.

M

PROGRAM repeatedly to select the high-

M

PROGRAM to adjust the high-frequency 

response (BASS).
Control range: –10.0 dB to +10.0 dB

■ Using the Zone OSD

You can display the FM/AM radio, XM Satellite Radio (U.S.A. and 
Canada models only), or HD Radio tuning information in the Zone 
video monitor. You can also browse and select the iPod or network/
USB contents by using the Zone OSD.

Set the operation mode selector to F

SOURCE and 

then press the desired input selector button (3).

Press K

DISPLAY on the remote control to turn on 

Press 9k / n / l / h and 9

ENTER repeatedly to 

• The OSD menu appears in English even if you set “LANGUAGE” to 

“JAPANESE” or “RUSSIAN” (see page 144).

• There are some characters that cannot be displayed in the front panel 

display or in the OSD of this unit. Those characters are replaced with 
underscores “_”.

• You can set the time for which the Zone OSD is displayed in the Zone 

video monitor by using “On Screen” in “Manual Setup” (see page 108).

y
Short message displays are also appears in the Zone video monitor. Use 
“Zone OSD” in “Manual Setup” to select that this unit displays the 
operational information of all zones or zone 2 only (see page 110).

Use this feature to play the main zone sources in the other zones 
simultaneously. This feature is useful to play back a back ground 
music in multiple zone in a home party.

1,2,3 ··· In the party mode, this unit distributes the same sources 

to the zones which join the party mode.

    4 ··· You can also operate the specific zone separately when 

this unit is in the party mode.

Press C

PARTY on the remote control to turn on the 

party mode.
“PARTY MODE ON” appears in the front panel display and then 
the main zone and the zones which join the party mode are turned 
on.

Press C

PARTY again to turn off the party mode.

“PARTY MODE OFF” appears in the front panel display and then 
the main zone and the zones that joins the party mode are turned off.

y
When this unit is in the party mode, the audio signals that is input at the 
HDMI IN jacks or DIGITAL IN jacks are output at the ZONE OUT jacks.

• If you select “MULTI CH” as the input source, this unit does not output 

any sounds when this unit is in the party mode.

• When you change the input source of the zone that joins the party mode, 

the input source of the main zone also changes same as the operated zone.

• When this unit is in the party mode, no signals are not output at the OUT 

(REC) jacks.

>

>

>

PC/MCX 

NET RADIO

USB

TOP

Before performing the following operations, set the operation mode 
selector on the remote control to FAMP.

Selecting the zones joining the party mode
You can select the zone that joins the party mode by using the 
“Party Mode Set” parameters. If a zone does not join the party 
mode, you can play back a source in the zone independently 
from the main zone. See page 109 for details.

1 2

3

4