Yamaha RX-Z11 User Guide

You can tune into any desired station simply by selecting the preset 
station group and number under which it was stored.

Make sure that a colon (:) appears in the front panel 
display.
If the colon (:) does not appears in the front panel display, press 
LPRESET/TUNING (or ISRCH MODE so that the colon 
(:) appears.

Press M

PROGRAM (or press 9A-E l / h 

repeatedly) to select the desired preset station group 
(A to E).
The preset station group letter appears in the front panel 
display and changes each time you push MPROGRAM.

Rotate M

PROGRAM (or press 9PRESET/CH k / n 

repeatedly) to select a preset station number (1 to 8).
The preset station group and number appear in the front panel 
display along with station band and frequency.

y 
You can also select the desired preset station number by pressing the 
numeric button (1 to 8) (B).

(Canada and Australia models) You can use the automatic preset 
tuning feature to store up to 40 FM stations with strong signals (A1 
to E8: 8 preset station numbers in each of the 5 preset station 
groups) in order. You can then recall any preset station easily by 
selecting the preset station number.

(U.S.A. model) You can use the automatic preset tuning feature to 
store up to 40 AM HD Radio, FM HD Radio, and analog FM radio 
stations with strong signals.

y
To preset the AM stations, use the manual preset tuning feature.

Rotate the D

INPUT selector (or press 3TUNER) to 

select “TUNER” the input source.

Press K

BAND (or 8BAND) repeatedly to select 

“FM” as the reception band.
“FM” appears in the front panel display.

J

MEMORY (or 0MEMORY) for 

The AUTO and MEMORY indicators flash. After 
approximately 10 seconds, automatic presetting starts from the 
current frequency and proceeds toward higher frequencies.
When the automatic presetting is completed, the AUTO and 
MEMORY indicators disappear.

y 
• You can specify the preset number from which this unit stores FM 

stations. After you perform step 3, press 

MPROGRAM (or 9A-E 

l / h) repeatedly to select the desired preset group and then rotate 
MPROGRAM (or press 9PRESET/CH k / n repeatedly) to select 
the preset station number which the first station will be stored.

• You can begin the tuning toward lower frequencies to store FM 

stations automatically. Press 

LPRESET/TUNING so that the colon 

(:) disappears from the front panel display and then turn 
MPROGRAM leftward after pressing and holding JMEMORY for 
more than 3 seconds.

J

MEMORY (or 0MEMORY) for 

more than 3 seconds.
The AUTO and MEMORY indicators flash, and this unit starts 
automatic presetting starts from the current frequency and 
proceeds toward higher frequencies immediately. This unit 
searches the stations by the following order:

1. FM HD Radio stations
2. AM HD Radio stations
3. Analog FM stations

When the automatic presetting is completed, the AUTO and 
MEMORY indicators disappear.

y 
“Please wait” appears in the front panel display when this unit is 
searching the stations by using the tuner unit that is not selected by 
“TUNER” (see page 96).

• Any stored station data existing under a preset station number is cleared 

when you store a new station under the same preset station number.

• If the number of received stations does not reach 40 (E8), automatic preset 

tuning automatically stops after searching for all the available stations.

• Only FM stations with sufficient signal strength are stored automatically 

by automatic preset tuning. If the station you want to store is weak in 
signal strength, tune into it manually and store it as described in “Manual 
preset tuning” on page 71.

Before performing the following operations, set the operation mode 
selector on the remote control to FSOURCE and then press 
3TUNER.

Preset the desired stations to this unit by using the automatic or manual 
preset tuning features in advance (see “Automatic preset tuning” on this 
page and “Manual preset tuning” on page 71).

A : F M 8 8 . 9 M H z

A 1 : F M 8 8 . 9 M H z

A 1 : F M 8 8 . 9 M H z