Yamaha RX-Z11 User Guide

Use this feature to select one of the 8 HD Radio audio programs 
(HD1 to HD8) when the unit is in the tuner mode. Each audio 
program contains data programs.

Press A

PRG SELECT b / a on the remote control 

repeatedly to toggle between HD Radio audio programs.
The HD indicator may disappear from the front panel display while 
toggling between data programs.

• Only 1 HD Radio audio program (HD1) is available for AM broadcasts, 

while up to 8 audio programs (HD1 to HD8) are available for FM 
broadcasts.

• When reception for an audio program ceases, the HD

 indicator disappears 

from the front panel display and HD1 is automatically selected after 
approximately 20 seconds.

• Some audio programs may not contain data programs depending on the 

broadcasting station and the time period.

• The audio programs from HD2 to HD8 can be selected only when they 

contain data programs.

There are 3 types of front panel displays that show HD Radio 
information when the unit is in the tuner mode: frequency, station 
and music information.

■ Front panel display

Press K

DISPLAY on the remote control repeatedly to 

(Upper line: Station name / FM or AM / Audio program)
Station information is available when a station name is received as 
data in 4 alphabetical codes.

(Lower line: Song title / Artist name / Program types / 
Comment)
Music information is available only when data programs are 
received.
If the music information is long, it automatically scrolls to the left in 
the front panel display.

y
You can set the front panel display mode by using the “Scroll” parameter in 
“Front Panel Disp.” (see page 112).

■ Video monitor

Press K

DISPLAY on the remote control.

The following information is displayed in the video monitor.

y
• To turn off the displayed information screen, press KDISPLAY again.
• You can set the time for which the HD Radio information is displayed in 

the video monitor by using the “On Screen” parameter in “Manual Setup” 
(see page 108).

• You can display the HD Radio information in the Zone video monitor (see 

• The current HD Radio reception level appears on the top of the HD Radio 

information screen. For the best reception, adjust the orientation of the 
antenna so that “

” or “

” is displayed here.

Before performing the following operations, set the operation mode 
selector on the remote control to FSOURCE and then press 
3TUNER.

W X Y Z - F M

: H D 1

F r a n k i e Z i p p e r