Yamaha RX-Z11 User Guide

Use this feature to access the desired music sources (WAV, MP3 and 
WMA files on the connected PC, MCX-2000 or USB storage 
devices and Internet Radio stations) directly. You can preset 8 items 
in each sub input sources.

■ Assigning the items to the numeric button (1-8)

Press 3

NET/USB to select “NET/USB” as the input 

Select a desired music source you want to assign to 
the numeric button (1-8) (B), and then play back the 
source.
See page 81 for details.

Press 0

MEMORY.

This unit in the memory preset mode. The MEMORY indicator 
flashes and following message appears in the video monitor 
and front panel display.

y
When you do not complete each of the following steps within 10 seconds, 
the memory preset mode is automatically canceled. In this case, start over 
from step 3.

Press desired numeric buttons (1-8) (B).
The number of the selected numeric button appears in the video 
monitor or front panel display.

Press 9

ENTER or 0MEMORY to confirm the 

■ Select an item by using numeric buttons (1-8) 

B

Press 3

NET/USB to select “NET/USB” as the input 

Press one of the numeric button (1-8) (B) which the 
desired item is assigned to select the item as the 
input source.
The selected preset number appears in the front panel display, 
and this unit starts the playback of the source assigned to the 
selected numeric button.

• “Empty Memory!” appears in the front panel display and the short 

message display when you press the numeric button (1-8) (B) to 
which no items are assigned.

• This unit does not recall the correct item assigned to the selected 

numeric button (1-8) (B) in the following cases:
– the connected USB device is incorrect.
– the PC or MCX-2000 which stores the selected item is turned off or 

disconnected from the network.

– the selected Internet Radio station is temporary unavailable or out 

of service.

– the directory of the selected item has been changed.

y
This unit stores the relative position of the preset items in a directory or 
playlist, and does not recall the correct item by using numeric buttons 
(1-8) (B) if you add or delete music files to or from the same directory 
or playlist as the preset items. In such cases, preset the desired item to 
the numeric buttons (1-8) (B) again.
We recommend the following methods:

PC server/MCX-2000
Create eight playlists which contain the desired items, and then preset 
the top item of each playlist to the numeric buttons (1-8) (B). When 
you change the items which are preset to the numeric buttons (1-8) 
(B), replace the registered items in the playlist with the desired items 
without deleting the playlist.

USB storage devices
Create eight directories which contain the desired items in a directory 
beside the directory which contains all music files, and then preset the 
top item of each directory to the numeric buttons (1-8) (B). When you 
change the items which are preset to the numeric buttons (1-8) (B), 
replace the items in the directory to the desired items without deleting 
the directory.

Before performing the following operations, set the operation mode 
selector on the remote control to FSOURCE.

- : P C / M C X

1 : P C / M C X

Before performing the following operations, set the operation mode 
selector on the remote control to FSOURCE.

1 : P C / M C X