Yamaha PSR-S710 User Guide
10
88
PSR-S910/S710 Owner’s Manual
Connections
– Using
Y
our Instr
ument with Other De
vices –
Connections
– Using Your Instrument with Other Devices –
Before connecting the instrument to other electronic components, turn off the power of all the
components. Also, before turning any components on or off, make sure to set all volume
levels to minimum (0). Otherwise, electrical shock or damage to the components may occur.
components. Also, before turning any components on or off, make sure to set all volume
levels to minimum (0). Otherwise, electrical shock or damage to the components may occur.
You can connect a stereo system to amplify the instrument’s sound by using the
OUTPUT [L/L+R]/[R] jacks. When using the PSR-S910, the microphone or guitar
sound connected to the instrument’s [MIC/LINE IN] jack is output at the same time.
OUTPUT [L/L+R]/[R] jacks. When using the PSR-S910, the microphone or guitar
sound connected to the instrument’s [MIC/LINE IN] jack is output at the same time.
When these are connected, you can use the instrument’s [MASTER VOLUME]
control to adjust the volume of the sound output to the external device.
control to adjust the volume of the sound output to the external device.
You can connect the output jacks of an external device (such as CD player, tone
generator, etc.) to the instrument’s AUX IN [L/L+R]/[R] jacks, letting you hear the
sound of that device through the built-in speakers of the instrument.
generator, etc.) to the instrument’s AUX IN [L/L+R]/[R] jacks, letting you hear the
sound of that device through the built-in speakers of the instrument.
Connecting Audio Devices
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
tion with a monaural device.
CAUTION
When the instrument’s sound is
output to an external device,
first turn on the power to the
instrument, then to the external
device. Reverse this order when
you turn the power off.
output to an external device,
first turn on the power to the
instrument, then to the external
device. Reverse this order when
you turn the power off.
CAUTION
Do not route the output from the
[OUTPUT] jacks to the [AUX IN]
jacks. If you make this connec-
tion, the signal input at the
[AUX IN] jacks is output from
the [OUTPUT] jacks. These con-
nections could result in a feed-
back loop that will make normal
performance impossible, and
may even damage both pieces
of equipment.
[OUTPUT] jacks to the [AUX IN]
jacks. If you make this connec-
tion, the signal input at the
[AUX IN] jacks is output from
the [OUTPUT] jacks. These con-
nections could result in a feed-
back loop that will make normal
performance impossible, and
may even damage both pieces
of equipment.
CAUTION
When the sound of an external
device is output to the instru-
ment, first turn on the power to
the external device, then to the
instrument. Reverse this order
when you turn the power off.
device is output to the instru-
ment, first turn on the power to
the external device, then to the
instrument. Reverse this order
when you turn the power off.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
tion with a monaural device.
NOTE
The instrument’s [MASTER VOL-
UME] setting affects the input signal
from the [AUX IN] jacks.
UME] setting affects the input signal
from the [AUX IN] jacks.
Using External Audio Devices for Playback
Playing External Audio Devices with the Built-in Speakers
Phone plug
(standard)
Audio cable
Phone plug
(standard)
Input jack
Powered speaker
Phone plug
(standard)
Audio cable
Pin plug
LINE OUT
CD player,
Tone generator
CAUTION
NOTE
Use audio cables and adaptor plugs
having no (zero) resistance.
having no (zero) resistance.