Yamaha Tyros2 Owner's Manual
Voice Creator—Custom Voice Edit
Reference
109
Tyros2 Owner’s Manual
5
Press the [OK] LCD button (lower [7] button).
6
Select the destination for saving the data by using the [TAB] but-
tons.
tons.
If, for example, you have a hard disk drive installed and a USB storage device connected
to the Tyros2, there will be three destination choices: USER, HD1, and USB1. Create a
folder if necessary by pressing the [FOLDER] LCD button (lower [7] button).
to the Tyros2, there will be three destination choices: USER, HD1, and USB1. Create a
folder if necessary by pressing the [FOLDER] LCD button (lower [7] button).
7
Press the [SAVE] LCD button (lower [6] button).
8
Enter the desired name for the Library file and press the [OK] LCD
button (upper [8] button).
button (upper [8] button).
• Even though the User drive can
be selected here, there is not
enough memory space in the
drive for storing Voice Creator
data. Make sure to use one of the
other destinations.
enough memory space in the
drive for storing Voice Creator
data. Make sure to use one of the
other destinations.
NOTE
Checking the storage capacity
• Before attempting to store data to
• Before attempting to store data to
the selected storage destination,
you may want to check to see if
there is enough available memory
space for the operation. Pressing
the [PROPERTY] LCD button
(lower [8] button) here calls up the
Property display for the selected
storage location/device, and
shows the overall capacity as well
as the amount of free space avail-
able for storing your data.
you may want to check to see if
there is enough available memory
space for the operation. Pressing
the [PROPERTY] LCD button
(lower [8] button) here calls up the
Property display for the selected
storage location/device, and
shows the overall capacity as well
as the amount of free space avail-
able for storing your data.
NOTE