Yamaha ns-8800 User Guide
+
+
–
–
SPEAKERS
L
R
SPEAKERS
A
B
L
R
+
+
–
–
SPEAKERS
A
B
L
R
+
+
–
–
CONNECTIONS TO YOUR AMPLIFIER
<
Standard Connections
>
<
Bi-Wired Connections
>
This speaker system is capable of standard connections and bi-wired connections. Before making connections, make sure that the amplifier is switched off.
Speakers output
terminals of the
amplifier
terminals of the
amplifier
Note
Do not let the bare speaker wires touch each other
as this could damage the speaker and/or the
amplifier.
Do not let the bare speaker wires touch each other
as this could damage the speaker and/or the
amplifier.
Leave the short
bars in place
when connecting.
bars in place
when connecting.
Short bar
Amplifier or
Receiver
Loosen
Tighten
Speaker
(L)
Speaker
(R)
Amplifier or
Receiver
Amplifier or
Receiver
Speaker
(L)
Speaker
(R)
Speaker
(L)
Speaker
(R)
Remove the short
bars before
connecting.
bars before
connecting.
Woofer terminals
Tweeter terminals
Both SPEAKERS A and B
should be selected.
should be selected.
Note
For bi-wired connections, use the same type of
cable for both the woofer and tweeter, making sure
to match the polarity.
For bi-wired connections, use the same type of
cable for both the woofer and tweeter, making sure
to match the polarity.
Black (–)
Red (+)
Black (–)
Red (+)
SPECIFICATIONS
Type ....... 2-way 3-speaker bass-reflex speaker system
Magnetic shielding type
Driver ........................................ 16 cm cone woofer x 2
2.5 cm dome tweeter
Impedance ....................................................... 6 ohms
Frequency Response ......................... 35 Hz to 28 kHz
Nominal Input Power .......................................... 160 W
Maximum Input Power ........................................ 300 W
Sensitivity ............................................ 89 dB/2.83 V/m
Crossover Frequency .......................................... 3 kHz
Dimensions (WxHxD) .................. 212 x 970 x 317 mm
Weight .............................................................. 19.2 kg
Accessories ................................................... Stand x 4
Tapping screw (4 mm) x 8
Pad x 4
Speaker cable (4 m) x 1
●
Specifications subject to change without notice due
to product improvements.
to product improvements.
●
Care should be taken not to exceed the input power
values noted above.
values noted above.
NS-8800(02.7.10)
02.7.11, 10:02 AM
4-5