Kenwood KRF-V5080D User Manual
31
EN
In case of difficulty
Remote control unit
Symptom
Remote control operation is not possible.
Cause
• The remote control is set to a different
operation mode.
• Batteries are exhausted.
• The remote control unit is too far away from
• The remote control unit is too far away from
the main system, controlling angle is too
large, or there is an obstacle between the
receiver and the remote.
large, or there is an obstacle between the
receiver and the remote.
• No tape or CD is placed in the source
component.
• An attempt is made to play a tape which is
being recorded in the cassette deck.
• The remote control has not been set to the
operation mode for the KENWOOD DVD player
you wish to control.
you wish to control.
Remedy
• Press the any of the Input Selector keys to
select the appropriate operation mode.
• Replace with new batteries.
• Operate the remote control unit within the
• Operate the remote control unit within the
controllable range.
• Place the tape or CD in the source component
which you want to play.
• Wait for recording to complete.
• Press the DVD POWER key for more than 2
seconds to activate the operation mode for
the KENWOOD DVD player you want to control
before operation.
the KENWOOD DVD player you want to control
before operation.
ª
*5439/30-32/EN
04.1.22, 1:25 PM
31