Korg MICRO User Manual
MIDI
89
Vocoder Switch
Vocoder switch: [Bn, 63, 05, Bn, 62, 04, Bn, 06, mm]
(n: channel, mm: parameter value)
Other controls
These messages are transmitted and received on the Global MIDI channel.
Voice Mode (COMMON page “VOIC.MODE”)
Voice Mode (“VOIC.MODE”): [Bn, 63, 05, Bn, 62, 00, Bn, 06, mm]
(n: channel, mm: parameter value)
System exclusive messages
microKORG XL format
F0: exclusive status
42: Korg ID
3n: [n=0–F] MIDI channel
7E: microKORG XL model ID
ff: function ID (type of message)
42: Korg ID
3n: [n=0–F] MIDI channel
7E: microKORG XL model ID
ff: function ID (type of message)
—
F7: end of exclusive
Universal system exclusive
System exclusive messages include a special category of messages
whose purpose is officially defined. These are called universal system
exclusive messages. Of these universal system exclusive messages, the
microKORG XL supports Master Volume and Master Fine Tuning.
whose purpose is officially defined. These are called universal system
exclusive messages. Of these universal system exclusive messages, the
microKORG XL supports Master Volume and Master Fine Tuning.
Master volume [F0, 7F, nn, 04, 01, vv, mm, F7]
(vv: lower byte of value, mm: upper byte of value, [mm, vv=7F, 7F] is Max,
[mm, vv=00, 00] is 0)
When a Master Volume message is received, the microKORG XL will
adjust its overall volume.
[mm, vv=00, 00] is 0)
When a Master Volume message is received, the microKORG XL will
adjust its overall volume.
Master fine tuning [F0, 7F, nn, 04, 03, vv, mm, F7]
(A value of 8192 [mm, vv=40, 00] is center (0 cent, A4=440.0Hz), 4096
[mm, vv=20, 00] is -50 cents, and 12288 [mm, vv=60, 00] is +50 cents.)
When master fine tuning is received, the value specified for the
microKORG XL’s GLOBAL page “MST TUNE” will be ignored, and the
overall pitch will be specified by the data that was received.
[mm, vv=20, 00] is -50 cents, and 12288 [mm, vv=60, 00] is +50 cents.)
When master fine tuning is received, the value specified for the
microKORG XL’s GLOBAL page “MST TUNE” will be ignored, and the
overall pitch will be specified by the data that was received.
Realtime Messages
Starting/stopping the arpeggiator
When the microKORG XL’s arpeggiator is synchronized to a connected
external MIDI device, system realtime messages Start and Stop will control
the arpeggiator.
external MIDI device, system realtime messages Start and Stop will control
the arpeggiator.
Start [FA]
When the Start [FA] message is received, the arpeggio pattern will be reset
to its beginning.
to its beginning.
Stop [FC]
When a Stop [FC] message is received, the arpeggiator will stop. (It will not
be turned off; the arpeggiator will start again when additional notes are
played.)
be turned off; the arpeggiator will start again when additional notes are
played.)
MSB (Hex)
LSB (Hex)
Value (transmitted)
Value (received)
Vocoder Sw
05(05)
04(00)
0...63: OFF,
64...127: ON
64...127: ON
0...63: OFF,
64...127: ON
64...127: ON
MSB (Hex)
LSB (Hex)
Value (transmitted)
Value (received)
Voice Mode
05(05)
00(00)
0...31: SINGLE,
32...63: LAYER,
64...95: SPLIT,
96...127: MULTI
32...63: LAYER,
64...95: SPLIT,
96...127: MULTI
0...31: SINGLE,
32...63: LAYER,
64...95: SPLIT,
96...127: MULTI
32...63: LAYER,
64...95: SPLIT,
96...127: MULTI
MIDI