Zonet zsr0104up User Manual
47
Appendix
Loading the Default Values
Once you have configured the Broadband Firewall Router (see Chapters 3 and 4), the
configuration settings are saved in the Broadband Firewall Router’s internal memory.
However, you can manually reset them to factory defaults by using the web browser or by
following the steps given below:
1. Power off and on the Broadband Firewall Router.
2. After power on, the Status indicator will flash 1 times. Now hold down the reset button on
configuration settings are saved in the Broadband Firewall Router’s internal memory.
However, you can manually reset them to factory defaults by using the web browser or by
following the steps given below:
1. Power off and on the Broadband Firewall Router.
2. After power on, the Status indicator will flash 1 times. Now hold down the reset button on
the Broadband Firewall Router. The red LED marked Status will give 1 short flash.
3. The factory defaults are now loaded.
After loading the default values, you might need to re-configure the Broadband Firewall
Router by following the steps in Chapter 3. Please see Chapter 3 for details.