Zhone 2000 User Manual

- 166 -

Type R to remove a Multicast Routing Source:

1. The IAD displays the IP address prompt:

Enter IP address for the Source:

Type the source IP address and press Enter.

2. The IAD displays the current subnet mask and prompt:

Enter subnet mask for the source:

(255.255.255.0) ->

Type the new subnet address and press Enter.

3. The IAD displays the available interfaces and a prompt:

Available Interfaces:

1. G2237 xDSL
2. 10/100BaseT Ethernet
0. (Abort)

Selection:

Type the option number to select the interface.

4. The IAD displays the port table for this interface and prompts for a port.

Port VPI VCI Encapsulation Type

PCR

Service

1

0

40 RFC 1483 (with LLC Encap)3641

UBR

Total = 3641 cps

Maximum PCR this interface can support = 3622 cps

Select Port: [1-8]

Type the port to delete and press Enter.

5. The IAD The IAD permanently removes the multicast routing source 

from the Multicast Routing Source Table and displays the Multicast 
Configuration menu.

6. Reset the IAD (page

) for changes to take effect.

Type S to display the Multicast Routing Source. The IAD displays the 
Multicast Routing Source Table.

NETWORK ADDRESS NETMASK INCOMING INTERFACE

*************** *************** ****************** 
0.0.0.0 0.0.0.0 0.0.0.0 190.232.5.1 default 

Press any key to continue.

IGMP is a communication protocol that operates between a router (The 
IAD) and its local subnet (Ethernet-connection) hosts. The router sends 
periodic IGMP query packets to the subnet to check for any hosts that 
have joined or would like to join a group.

Type G to display the IGMP Group. The IAD displays all Internet Group 
Management Group (IGMP) groups for each interface and their expiration 
times.

IGMP Groups

Interface 10/100BaseT Ethernet:

224.0.0.1 (Default Local Join) Expires: NEVER