Zhone 5100 User Guide
CHAPTER 2
Node options
Node options
12
Vpacket 5100/6100 Series Web Interface Manual
Viewing the System Status window
When you load the Web Management Interface, the System Status Window is the first screen that
you see. This window lists all the currently configured system-level attributes for the 6100 VDR.
Figure 2-1. System Status window
The system parameters in this window include:
•
The system parameters in this window include:
•
Description lists the VDR type and hardware and software release numbers
•
Contact lists a person to be contacted for support
•
Uptime displays the cumulative time (dd:hh:mm:ss) since the VDR was last rebooted
•
Serial Number lists the unit’s serial number
•
Telephony Termination Address lists the IP address for the terminating voice traffic device
•
Location displays the geopolitical location of the unit
•
System Name displays the assigned name for the unit and becomes the prompt name
•
System Time shows the current time on the unit
•
Software Image 1 Name: the name of the software code (.bin) file in location 1
•
Software Image 2 Name: the name of the software code (.bin) file in location 2
•
Configuration 1 Name: the name of the configuration file (.cfg) file in location 1
•
Configuration 2 Name: the name of the configuration file (.cfg) file in location 2
•
Active Image Number: the currently loaded image file as numbered (1 or 2)
•
Image Number to use: specifies that the file in a particular slot will be used in the next reset
•
Active Configuration Number: the current configuration file (1 or 2)
•
Image Configuration to use: specifies that the file in a particular slot will be used in the
next reset
next reset