Zhone 6301 User Guide

Page of 142
3. Configuring the DSL Router
6300-A2-GB20-00
March 2002
3-15
Once the PPP-negotiated IP address is assigned, the ReachDSL Router’s 
configuration database will automatically be converted to a new configuration 
determined by this IP address and the interface to which it is assigned. However, 
any changes made to the interface assignment for the PPP-negotiated IP address 
do not take effect until the next time the PPP link is established. This new 
configuration will result in the following:
„
The DSL and/or Ethernet interface(s) are reconfigured.
„
Routes associated with any interfaces that have been removed are deleted. 
An exception to this is when the negotiated IP address is assigned to the 
Ethernet interface and the subnet defined by the interface’s IP address is the 
same as the one defined by the negotiated IP address.
„
All dynamic ARP entries are removed. All static ARP entries associated with 
the DSL interface and any removed interfaces are deleted. Static ARP entries 
for the Ethernet interface are retained if the negotiated IP address is assigned 
to the Ethernet interface and the subnet defined by the interface’s IP address 
is the same as the one defined by the negotiated IP address.
„
The negotiated IP address automatically becomes the primary IP address and 
the NAPT public IP address.
„
An active service domain Telnet session is terminated if the interface 
associated with the session is removed or the IP address of the interface is 
changing.
„
All DHCP bindings and BOOTP Relay Agent snoop information are removed if 
the subnet defined by the Ethernet IP address changes. If the new Ethernet IP 
address is still in the same subnet, then only the binding and snoop 
information that conflicts with this IP address is removed.
„
If the DSL interface IP address changes, the Basic NAT static mapping that 
conflicts with the new DSL IP interface address and all Basic NAT dynamic 
mappings are removed.
When the negotiated IP 
address is assigned to the . . . Then . . . 
Ethernet interface of the 
ReachDSL Router
The DSL interface will automatically be configured as 
unnumbered, and any IP address(es) previously 
assigned to the Ethernet and DSL interfaces are 
removed. A route for the subnet defined by the 
negotiated IP address assigned to the Ethernet interface 
will automatically be added to the IP routing table.
DSL interface of the 
ReachDSL Router
Any IP address(es) previously assigned to the DSL 
interface are removed. The IP address(es) assigned to 
the Ethernet interface are left intact unless they conflict 
with the negotiated IP address. The IP address used by 
the Ethernet interface must be assigned by the user.