Zhone 6301 User Guide
A. Command Line Interface
A-24
March
2002
6300-A2-GB20-00
show bridge
Minimum Access Level: Operator
Command Mode: Standard
Command Mode: Standard
Displays the bridge configuration and forwarding database.
Sample
show bridge
display:
Bridging – disabled
Spanning tree – enabled
Configured aging timeout: 300 seconds
Configured aging timeout: 300 seconds
Filtering database entries:
MAC addr action interface timeout (sec.)
xx:xx:xx:xx:xx:xx xxxxxxx xxxxxx xxxxxxxxxxxx
NOTES:
– Action can be discard or forward.
– Timeout can be Permanent, the number of seconds left before the entry is aged out
and goes away, or <1 (less than a second).
show config
Minimum Access Level: Operator
Command Mode: Standard
Command Mode: Standard
Sample
show config
display:
syslog {enabled
|
disabled}
eth1 frame {DIX
|
802.3}
proxy ARP eth1 {enabled
|
disabled}
proxy ARP dsl1 {enabled
|
disabled}
basic NAT {enabled
|
disabled}
NAPT {enabled
|
disabled}
or NAT disabled
*
DHCP server {enabled
|
disabled}
DHCP relay {enabled
|
disabled}
bridging {enabled
|
disabled}
IP routing {enabled
|
disabled}
IP multicast {enabled
|
disabled}
packet processing {enabled
|
disabled}
dsl1 1483 encapsulation {LLC
|
VC Muxing}
autologout {enabled
|
disabled}
PPPoE client {enabled
|
disabled}
telnet {enabled
|
disabled}
telnet login required {enabled
|
disabled}
* NAT disabled only appears when both forms of NAT are disabled.
show console
Minimum Access Level: Operator
Command Mode: Standard
Command Mode: Standard
Displays either
console enabled
or
console disabled
.
Table A-17. Show Commands (2 of 10)