Zebra ttp8200 User Manual

Programming
Logotypes

P1003638-003

TTP 8000 Technical Manual

10/19/2009

To print a logotype, send <ESC>g<n1><n2><n3><n4><n5> where n1 is the logotype 
number, n2n3 is the horizontal print position, and n4n5 is the vertical print position of the 
upper left corner of the logotype.

All logotypes are erased with the <ESC>&L command.

n1

One byte logotype number, (0—15)

n2n3

Two byte X position measured in pixels from the left-hand edge of the 
print window. 

n4n5

These bytes (Y-position) must be inserted, but they are ignored as a 
logotype is always printed at the current Y-position.

Loading to the flash PROM will erase the RAM completely since the RAM is 

used during the loading process. Any print data residing in RAM will thus be lost.