Eagle 240 s Operating Guide

55

        

At left, Sonar Menu with Ping Speed command selected.

Ping Speed Control Bar, right, at default setting.

To change Ping Speed:
1. From the Sonar Page, press 

|

↓ to 

|

.

2. The Ping Speed Control Bar appears. Press 

↑ to increase ping speed;

press 

↓ to decrease ping speed. When it's set at the desired level, press

.

To adjust Sensitivity:
1. From the Sonar Page, press 

|

.

2. The Sensitivity Control Bar appears. Press 

↓ to decrease sensitivity;

press 

↑ to increase sensitivity. When it's set at the desired level, press

. (When you reach the maximum or minimum limit, a tone sounds.)

To turn off HyperScroll:
1. From the Sonar Page, press 

|

↓ to 

|

.

2. The Ping Speed Control Bar appears. Press 

↓ to decrease ping speed

to 50 percent. When it's set at the desired level, press 

.

When you boost ping speed and switch into HyperScroll, the width of
the FasTrack bar graph display doubles in width at the right side of the
screen. This allows you to better see the virtually instantaneous sonar
returns, just as you would on a flasher sonar unit. For more informa-
tion on FasTrack, see it's entry in this section.

Reset Options

This command is used to reset all features, options and settings to their
original factory defaults. This is useful when you have changed several
settings and want to return the unit to basic automatic operation.