Eagle 240 s User Manual

88

Plotter screen showing Find Waypoint.

7. To clear the search and return to the last page displayed, press

|

. (Before you completely exited out of the Search menus, you

could have gone looking for another place.)

Navigate To a Waypoint

You can select any waypoint visible on the Plotter Page with the cursor,
then use the Navigate to Cursor command (we described how to do that
earlier in this section). However, you can avoid scrolling the plotter to
pick your waypoint if you use the Find Waypoint commands:

1. Press 

. To look up the nearest waypoint, just press 

ENT;

 or, to

look by name (and scroll through the entire waypoint list), press 

↓ to

|

. For this example, look by name.

2. If your waypoint list is a long one, you can spell out the waypoint
name in the 

 box to search for it. (Press 

↑ or ↓ to change the

first character, then press 

→ to move the cursor to the next character

and repeat until the name is correct, then press 

 to jump to the list

below.)

3. If the list is short, you can jump directly to the 

 box by

pressing 

. Use 

↑ or ↓ to select the waypoint name, press 

 and

the waypoint information screen appears with the 

 command se-

lected.

4. To begin navigating to the waypoint, press 

.