Eagle 1000c User Guide

42

2.  PAGES – Pressing this and the 

← → arrow keys switches the unit

between the four different page screens. (Satellite Status Page,
Navigation Page, Map Page and Sonar Page.) Each page represents one
of the unit's major operation modes.

3.  MENU – Press this key to show the menus and submenus, which
allow you to select a command or adjust a feature. This also accesses
search functions for streets, intersections, addresses and highway exits.

4.  ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, enter data and move the map and sonar
chart cursors.

5.  ENT/ICONS (Enter & Icons) – This key allows you to save data,
accept values or execute menu commands. It is also used to create
event marker icons.

6.  EXIT – The Exit key lets you return to the previous screen, clear
data and close menus.

7.  WPT – (Waypoint) The Waypoint key is used to save and recall
waypoints, search for waypoints and access the waypoint list. It also
launches the Point-of-Interest (POI) search menus and is involved in
some navigation functions.

8. ZOUT – (Zoom Out) – This key lets you zoom the screen out. On the
Sonar Page, this key returns you to a full sonar chart display, showing
the entire water column from surface to bottom. On the Map Page, this
lets you see a larger geographic area on the map. Less detail is seen as
you zoom out.

9. ZIN – (Zoom In) – This key lets you zoom the screen in. On the Sonar
Page, this key enlarges fish signals and bottom detail. On the Map
Page, zooming in lets you see greater detail in a smaller geographic
area on the map.

Power/lights on and off

To turn on the unit, press 

. As the unit powers up, the Map Page is

displayed first. To switch to the Sonar Page, press 

|

→|

.

To turn on the backlight, press 

 again. The unit has three backlight

levels to select from. Repeatedly pressing 

 will cycle through the

backlight settings and turn off the backlight.

Turn off the unit by pressing and holding the 

 key for 3 seconds.