ZyXEL NBG-318S User Guide
Chapter 5 Wireless LAN
NBG-318S User’s Guide
77
Figure 39 Network > Wireless LAN > General: No Security
The following table describes the labels in this screen.
Table 25 Wireless No Security
LABEL
DESCRIPTION
Security Mode
Choose No Security from the drop-down list box.
Apply
Click Apply to save your changes back to the NBG-318S.
Reset
Click Reset to reload the previous configuration for this screen.
5.5.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key.
Your NBG-318S allows you to configure up to four 64-bit or 128-bit WEP keys but only one
key can be enabled at any one time.
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key.
Your NBG-318S allows you to configure up to four 64-bit or 128-bit WEP keys but only one
key can be enabled at any one time.
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.