ZyXEL p-660h-61 User Guide
Prestige 660H Series User’s Guide
Introducing the Web Configurator
2-1
Chapter 2
Introducing the Web Configurator
This chapter describes how to access and navigate the web configurator.
2.1 Web Configurator Overview
The embedded web configurator allows you to manage the Prestige from anywhere through a browser
such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and later or
Netscape Navigator 7.0 and later versions with JavaScript enabled. It is recommended that you set
your screen resolution to 1024 by 768 pixels
such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and later or
Netscape Navigator 7.0 and later versions with JavaScript enabled. It is recommended that you set
your screen resolution to 1024 by 768 pixels
2.2 Accessing the Prestige Web Configurator
Step 1.
Make sure your Prestige hardware is properly connected (refer to the Compact Guide).
Step 2.
Prepare your computer/computer network to connect to the Prestige (refer to the Compact
Guide).
Guide).
Step 3.
Launch your web browser.
Step 4.
Type "192.168.1.1" as the URL.
Step 5.
An Enter Network Password window displays. Enter the user name (“admin” is the
default), password (“1234” is the default) and click OK.
default), password (“1234” is the default) and click OK.
Figure 2-1 Password Screen
Step 6.
You should now see the SITE MAP screen.
The Prestige automatically times out after five minutes of
inactivity. Simply log back into the Prestige if this happens to you.
2.3 Resetting the Prestige
If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the Prestige to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to “1234”.
button at the back of the Prestige to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to “1234”.