ZyXEL p-660r-t1 v2 User Manual
P-660R-Tx v2 Series User’s Guide
78
Chapter 7 Network Address Translation (NAT) Screens
Figure 27 Edit SUA/NAT Server Set
The following table describes the labels in this screen.
Table 18 Edit SUA/NAT Server Set
LABEL
DESCRIPTION
Start Port No.
Enter a port number in this field.
To forward only one port, enter the port number again in the End Port No. field.
To forward a series of ports, enter the start port number here and the end port
To forward only one port, enter the port number again in the End Port No. field.
To forward a series of ports, enter the start port number here and the end port
number in the End Port No. field.
End Port No.
Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port No. field
To forward only one port, enter the port number again in the Start Port No. field
above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with
To forward a series of ports, enter the last port number in a series that begins with
the port number in the Start Port No. field above.
IP Address
Enter your server IP address in this field.
Save
Click Save to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to return to the previous configuration.