ZyXEL nbg-4615 User Guide
Chapter 11 Universal Repeater Mode
NBG4615 User’s Guide
95
Note: To have wireless clients access or acquire an IP address from another access
point or wireless router (B) through the NBG4615 (A) in universal repeater
mode, you must set the channel number in the Wireless LAN > General
screen to be the same as the one on the wireless router or AP to which the
NBG4615 wants to connect.
mode, you must set the channel number in the Wireless LAN > General
screen to be the same as the one on the wireless router or AP to which the
NBG4615 wants to connect.
11.6.1 No Security
Figure 59 Universal Repeater Mode: Wireless LAN > Universal Repeater: No
Security
The following table describes the labels in this screen.
A
B
Table 32 Universal Repeater Mode: Wireless LAN > Universal Repeater: No
Security
Security
LABEL
DESCRIPTION
Universal Repeater Parameters
Enable
Enable
Select this option to have the NBG4615 connect to the specified access
point.
point.
SSID
Enter the name of the access point to which you are connecting.
MAC Address
(Optional)
(Optional)
Enter the MAC address of the access point to which you are connecting.
Security Mode
Select No Security if the access point to which you want to connect
does not use encryption.
does not use encryption.
Apply
Click Apply to save your changes back to the NBG4615.
Cancel
Click Cancel to reload the previous configuration for this screen.