MSI 865 User Guide
6-15
Wireless LAN Card
In the Status tab, you can configure more network settings.
Channel
Specifies the operating radio frequency channel in Ad-hoc mode, which
should be set to the same channel as the other points in the wireless
network.
Specifies the operating radio frequency channel in Ad-hoc mode, which
should be set to the same channel as the other points in the wireless
network.
Speed
This field sets the current transmitting rate. The speed should be set to
This field sets the current transmitting rate. The speed should be set to
Auto rate to optimize performance and range, which will adjust the
transfer speed for best performance and longest range automatically.
transfer speed for best performance and longest range automatically.
Radio
Set to On to activate the radio.
Set to On to activate the radio.
SSID
Means Service Set Identifier, a unique name shared among all points
in a wireless network. It must be identical for all points in the network.
Then the card will be able to connect to an access point with the
same SSID.
Means Service Set Identifier, a unique name shared among all points
in a wireless network. It must be identical for all points in the network.
Then the card will be able to connect to an access point with the
same SSID.
Signal Strength:
shows the received signal
strength level.
Link Quality:
shows the measured signal
level and connection status.
shows the received signal
strength level.
Link Quality:
shows the measured signal
level and connection status.
6.5 Status
Click Advance, and you can get more information about the LAN traffic status
and more detailed settings.
and more detailed settings.