DELL 3000 Service Manual
Removing and Replacing Parts
4-63
13.3
-Inch LCD Components
The 13.3-inch LCD assembly consists of the following components:
•
Front bezel
•
LCD panel
•
Inverter board and cable
•
Hinges
•
Bracket
•
Back cover
•
LCD wiring harness
The following procedures provide removal and replacement procedures for
these components, and assume that the 13.3-inch LCD assembly has been
removed from the computer. See “LCD Assembly” found earlier in this chapter.
these components, and assume that the 13.3-inch LCD assembly has been
removed from the computer. See “LCD Assembly” found earlier in this chapter.
13.3-Inch LCD Front Bezel
Figure 4-45. 13.3-Inch LCD Front Bezel Removal
To remove the 13.3-inch LCD front bezel, follow these steps:
1. Remove the LCD assembly.
See “LCD Assembly” found earlier in this chapter.
2. Use a dental pick to pry the front-bezel screw covers out of the screw holes
in the bezel.
3. Remove front-bezel screws F5 and F6.
bezel screw
covers (2)
covers (2)
(screws F5 and
F6 are 5 mm)
F6 are 5 mm)
F5
F6
front bezel
5 mm
bumpers (2)