ZyXEL p-2302hwdl-p1 User Manual

 

All contents copyright (c) 2005 ZyXEL Communications Corporation.   

6

• 

If you have only one computer, connect the computer to the LAN port on the Prestige using a 

crossover Ethernet cable (red). 

• 

If you have more than one computer, you must use a hub or switch to connect the computers to the 

LAN port on the Prestige using a straight-though Ethernet cable. 

2. TCP/IP Installation   

You must first install TCP/IP software on each computer before you can use it for Internet access. If you have 

already  installed  TCP/IP,  go  to  the  next  section  to  configure  it;  otherwise,  follow  these  steps  to  install  the 

software:   

• 

In the 

 window, click 

 button. 

• 

In the 

 window, select 

and click 

. 

• 

In the 

 window, select 

 and then select 

 from the 

 field and click 

. 

3. TCP/IP Configuration   

Follow these steps to configure Windows TCP/IP:   

• 

In the 

 window, select 

 and click 

. 

• 

In the 

 Properties window, select 

. 

Note: Do not assign arbitrary IP address and subnet mask to your computer(s). Otherwise, you will not be able 

to access the Internet.   

• 

Click the 

 configuration tab and select 

Disable WINS Resolution.

 

• 

Click the 

 tab. Select any installed gateways and click the 

 button until there is 

none listed. 

• 

Click the 

 tab and select 

. 

• 

Click 

 to save and close the 

 properties window 

• 

Click 

 to close the Network window. You will be prompted to insert your Windows CD or disk. 

When the drivers are updated, you will be asked if you want to restart the computer. Make sure 

your Prestige is turned on before clicking Yes. Repeat the above steps for each Windows computer 

on your network. 

• 

Setting up the Prestige router